Buy N,N,N',N'-Tetramethylethylenediamine | 110-18-9

06 Aug.,2024

 

Buy N,N,N',N'-Tetramethylethylenediamine | 110-18-9




Abstract

Compounds containing vicinal diol (glycol) groups, including saccharides, could be modified with sixvalent osmium complexes with nitrogenous ligands, particularly with N,N,N',N'-tetramethylethylenediamine (Os(VI)tem). The modification products are electrochemically active. Here we show that aminosaccharides can also be modified by Os(VI)tem. We studied chitosan oligosaccharides in their acetylated and deacetylated form in 0.2 M Na-phosphate, pH 6.9. Deacetylated chitosan oligosaccharides with free amino groups modified by Os(VI)tem yielded two peaks (peak I' at -0.15 V and peak II' at about -0.38 V) despite the fact that these oligomers contain only one glycol group on the non-reducing end of the molecule. The electrochemical behavior of Os(VI)tem modified deacetylated chitosan oligomers differs from Os(VI)tem modified simple saccharides, containing only glycol groups, predominantly in peak I'. Our results suggest that free amino groups are involved in Os(VI)tem modification of chitosan oligomers.





Abstract

In this work, we synthesized and characterized a novel Brönsted acidic ionic liquid from the reaction of N, N, N', N'-tetramethylethylenediamine with chlorosulfonic acid and explored its catalytic activity in 1, 8-dioxo-octahydroxanthenes synthesis.
Dimedone, aryl aldehydes, and the ionic liquid as the catalyst were reacted under solvent-free conditions. The progressive of the reaction was monitored by a thin layer of chromatography (ethyl acetate/n-hexane = 1/5). All products were characterized as the basis of their spectra data and melting point by comparison with those reported in the literature.
The prepared ionic liquid was successfully applied in the synthesis of 1, 8-dioxooctahydroxanthenes in good to high yields on the reaction of aryl aldehyde and dimedone at 120°C under solvent-free conditions.
This research demonstrates that the catalyst is impressive for 1, 8-dioxo-octahydroxanthenes synthesis under solvent-free conditions.





Abstract

The unpleasant smell released from dead bodies, may serve as an alarm for avoiding certain behaviour or as feeding or oviposition attractants for animals. However, little is known about their effect on the structure and function of proteins. Previously, we reported that using the aroma form of TEMED (a diamine), representative of the "smell of death", could completely inhibit the fibril formation of HEWL, as an antibacterial enzyme, and a model protein for fibrillation studies. To take this further, in this study we investigated the kinetics of TEMED using a number of techniques and in particular X-ray crystallography to identify the binding site(s) of TEMED and search for hotspot(s) necessary to inhibit fibril formation of HEWL. Structural data, coupled with other experimental data reported in this study, revealed that TEMED completely inhibited fibril formation and stabilized the structure of HEWL through enhancement of the CH-Π interaction and binding to an inhibitor hotspot comprised of residues Lys33, Phe34, Glu35 and Asn37 of HEWL. Additionally, results from this study showed that the binding of TEMED increased the activity and thermal stability of HEWL, helping to improve the function of this antibacterial enzyme. In conclusion, the role of the "smell of death", as an important signal molecule affecting the activity and stability of HEWL was greatly highlighted, suggesting that aroma producing small molecules can be signals for structural and functional changes in proteins.





Abstract

Polyacrylamide gel electrophoresis (PAGE) has become one of the most powerful and widely used separation techniques for complex biological samples, whose traditional detection methods include organic dye or silver staining. For simple, convenient, and ultrasensitive detection of proteins after PAGE, a novel enhanced photoluminescent (PL) imaging method was developed. Thioglycolic acid (TGA)-capped CdTe quantum dots (QDs) and the enhancer reagent tetramethylethylenediamine (TEMED) were introduced, achieving the direct detection of various proteins in native 1-DE, 2-DE and SDS-PAGE. Here we describe the general protocol of TEMED enhanced PL imaging by QDs, including materials, practical procedures, and some notes.





Abstract

The functionalization of polysaccharides with synthetic polymers has attracted great attention owing to its application in many industrial fields. The aim of this work was to study the impact of pectin functionalization with N,N-diethylacrylamide (DEAAm). Pectin was modified via microwave-induced graft copolymerization of DEAAm using ceric ammonium nitrate (CAN) and N,N,N',N'-tetramethylethylenediamine (TEMED). FTIR,
C NMR, DSC/TGA, XRD, and SEM techniques were used to verify the structure of graft copolymers. Various reaction conditions such as microwave irradiation time, temperature, microwave power, monomer, initiator, and TEMED concentrations were investigated to get a maximum grafting yield of 192%. Lower critical solution temperatures (LCST) of graft copolymers were determined by UV spectroscopy. Graft copolymers were found to be thermo-sensitive, with LCST of 31°C and high thermal resistance. Biocompatibility test of copolymers showed that copolymers were not cytotoxic to L929 fibroblasts cells and can be used as a biomaterial.





Abstract

N,N,N',N'-Tetramethylethylenediamine (TMEDA) has been one of the most prevalent and successful additives used in iron catalysis, finding application in reactions as diverse as cross-coupling, C-H activation, and borylation. However, the role that TMEDA plays in these reactions remains largely undefined. Herein, studying the iron-catalyzed hydromagnesiation of styrene derivatives using TMEDA has provided molecular-level insight into the role of TMEDA in achieving effective catalysis. The key is the initial formation of TMEDA-iron(II)-alkyl species which undergo a controlled reduction to selectively form catalytically active styrene-stabilized iron(0)-alkyl complexes. While TMEDA is not bound to the catalytically active species, these active iron(0) complexes cannot be accessed in the absence of TMEDA. This mode of action, allowing for controlled reduction and access to iron(0) species, represents a new paradigm for the role of this important reaction additive in iron catalysis.





Abstract

Monosized beads of polar resins were synthesized for combinatorial chemistry and chemical biology by sustainable microchannel flow synthesis. Regular, biocompatible, and optically encoded beads could be efficiently prepared on large scale and in high yield. In a preparative flow polymerization instrument, taking advantage of a designed T-connector for droplet formation, quality beads were synthesized with accurate size control using a minimal amount of recirculating silicon oil as suspension medium. Bead-size was controlled through shear imposed by the silicon oil flow rate. This process provided 86% yield of &#;500 μm macrobeads beads within a 20 μm size range with no deformities or vacuoles, ideally suited for combinatorial chemistry and protein binding studies. The simple flow equipment consisted of a syringe pump for monomer and initiator delivery, a T-connector, a gear pump for oil recirculation, a long, heated coil of Teflon tubing and a collector syringe. The method was used for preparation of PEGA
beads, optically encoded with fluorescent microparticles. The microparticle matrix (MPM) encoded beads were tested in a MPM-decoder showing excellent recognition in bead decoding.





Abstract

A one-step synthesis of 1,1'- and 2,2'-methylene-bridged N-heterobiaryls directly from the corresponding N-heterocycles in a reaction with methylmagnesium chloride in the presence of catalytic amounts of N,N,N',N'-tetramethylethylenediamine under thermal and microwave conditions is reported. The split-and-merge methylenation of 2,2'-N-heterobiaryls and the direct ortho-alkylation of quinoline and isoquinoline with Grignard reagents have also been developed. Mechanistic studies identified several intermediates and provided insight into the formation and roles of magnesium hydride species in the process.





Abstract

Expansion microscopy is a recently introduced imaging technique that achieves super-resolution through physically expanding the specimen by ~4×, after embedding into a swellable gel. The resolution attained is, correspondingly, approximately fourfold better than the diffraction limit, or ~70 nm. This is a major improvement over conventional microscopy, but still lags behind modern STED or STORM setups, whose resolution can reach 20-30 nm. We addressed this issue here by introducing an improved gel recipe that enables an expansion factor of ~10× in each dimension, which corresponds to an expansion of the sample volume by more than 1,000-fold. Our protocol, which we termed X10 microscopy, achieves a resolution of 25-30 nm on conventional epifluorescence microscopes. X10 provides multi-color images similar or even superior to those produced with more challenging methods, such as STED, STORM, and iterative expansion microscopy (iExM). X10 is therefore the cheapest and easiest option for high-quality super-resolution imaging currently available. X10 should be usable in any laboratory, irrespective of the machinery owned or of the technical knowledge.





Abstract

Polyacrylamide gel electrophoresis (PAGE) coupled with mass spectrometry has been well established for separating, identifying and quantifying protein mixtures from cell lines, tissues or other biological samples. The copolymerization process of acrylamide and bis-acrylamide is the key to mastering this powerful technique. In general, this is a vinyl addition reaction initiated by free radical-generating reagents such as ammonium persulfate (APS) and tetramethylethylenediamine (TEMED) under basic pH and degassing experimental condition. We report herein a photocatalytic polymerization approach that is based on photo-generated hydroxyl radicals with nanoparticles of titanium dioxide. It was shown that the polymerization process is greatly accelerated in acidic condition when ultraviolet light shots on the gel solution containing TiO2 nanoparticles without degassing. This feature makes it very useful in preparing Triton X-100 acid urea (TAU) gel that has been developed for separating basic proteins such as histones and variants in acidic experimental condition. Additionally, the presence of titanium dioxide in the gel not only improves mechanistic property of gels but also changes the migration pattern of different proteins that have different affinities to titanium dioxide.


Compounds containing vicinal diol (glycol) groups, including saccharides, could be modified with sixvalent osmium complexes with nitrogenous ligands, particularly with N,N,N',N'-tetramethylethylenediamine (Os(VI)tem). The modification products are electrochemically active. Here we show that aminosaccharides can also be modified by Os(VI)tem. We studied chitosan oligosaccharides in their acetylated and deacetylated form in 0.2 M Na-phosphate, pH 6.9. Deacetylated chitosan oligosaccharides with free amino groups modified by Os(VI)tem yielded two peaks (peak I' at -0.15 V and peak II' at about -0.38 V) despite the fact that these oligomers contain only one glycol group on the non-reducing end of the molecule. The electrochemical behavior of Os(VI)tem modified deacetylated chitosan oligomers differs from Os(VI)tem modified simple saccharides, containing only glycol groups, predominantly in peak I'. Our results suggest that free amino groups are involved in Os(VI)tem modification of chitosan oligomers.In this work, we synthesized and characterized a novel Brönsted acidic ionic liquid from the reaction of N, N, N', N'-tetramethylethylenediamine with chlorosulfonic acid and explored its catalytic activity in 1, 8-dioxo-octahydroxanthenes synthesis.Dimedone, aryl aldehydes, and the ionic liquid as the catalyst were reacted under solvent-free conditions. The progressive of the reaction was monitored by a thin layer of chromatography (ethyl acetate/n-hexane = 1/5). All products were characterized as the basis of their spectra data and melting point by comparison with those reported in the literature.The prepared ionic liquid was successfully applied in the synthesis of 1, 8-dioxooctahydroxanthenes in good to high yields on the reaction of aryl aldehyde and dimedone at 120°C under solvent-free conditions.This research demonstrates that the catalyst is impressive for 1, 8-dioxo-octahydroxanthenes synthesis under solvent-free conditions.The unpleasant smell released from dead bodies, may serve as an alarm for avoiding certain behaviour or as feeding or oviposition attractants for animals. However, little is known about their effect on the structure and function of proteins. Previously, we reported that using the aroma form of TEMED (a diamine), representative of the "smell of death", could completely inhibit the fibril formation of HEWL, as an antibacterial enzyme, and a model protein for fibrillation studies. To take this further, in this study we investigated the kinetics of TEMED using a number of techniques and in particular X-ray crystallography to identify the binding site(s) of TEMED and search for hotspot(s) necessary to inhibit fibril formation of HEWL. Structural data, coupled with other experimental data reported in this study, revealed that TEMED completely inhibited fibril formation and stabilized the structure of HEWL through enhancement of the CH-Π interaction and binding to an inhibitor hotspot comprised of residues Lys33, Phe34, Glu35 and Asn37 of HEWL. Additionally, results from this study showed that the binding of TEMED increased the activity and thermal stability of HEWL, helping to improve the function of this antibacterial enzyme. In conclusion, the role of the "smell of death", as an important signal molecule affecting the activity and stability of HEWL was greatly highlighted, suggesting that aroma producing small molecules can be signals for structural and functional changes in proteins.Polyacrylamide gel electrophoresis (PAGE) has become one of the most powerful and widely used separation techniques for complex biological samples, whose traditional detection methods include organic dye or silver staining. For simple, convenient, and ultrasensitive detection of proteins after PAGE, a novel enhanced photoluminescent (PL) imaging method was developed. Thioglycolic acid (TGA)-capped CdTe quantum dots (QDs) and the enhancer reagent tetramethylethylenediamine (TEMED) were introduced, achieving the direct detection of various proteins in native 1-DE, 2-DE and SDS-PAGE. Here we describe the general protocol of TEMED enhanced PL imaging by QDs, including materials, practical procedures, and some notes.The functionalization of polysaccharides with synthetic polymers has attracted great attention owing to its application in many industrial fields. The aim of this work was to study the impact of pectin functionalization with N,N-diethylacrylamide (DEAAm). Pectin was modified via microwave-induced graft copolymerization of DEAAm using ceric ammonium nitrate (CAN) and N,N,N',N'-tetramethylethylenediamine (TEMED). FTIR,C NMR, DSC/TGA, XRD, and SEM techniques were used to verify the structure of graft copolymers. Various reaction conditions such as microwave irradiation time, temperature, microwave power, monomer, initiator, and TEMED concentrations were investigated to get a maximum grafting yield of 192%. Lower critical solution temperatures (LCST) of graft copolymers were determined by UV spectroscopy. Graft copolymers were found to be thermo-sensitive, with LCST of 31°C and high thermal resistance. Biocompatibility test of copolymers showed that copolymers were not cytotoxic to L929 fibroblasts cells and can be used as a biomaterial.N,N,N',N'-Tetramethylethylenediamine (TMEDA) has been one of the most prevalent and successful additives used in iron catalysis, finding application in reactions as diverse as cross-coupling, C-H activation, and borylation. However, the role that TMEDA plays in these reactions remains largely undefined. Herein, studying the iron-catalyzed hydromagnesiation of styrene derivatives using TMEDA has provided molecular-level insight into the role of TMEDA in achieving effective catalysis. The key is the initial formation of TMEDA-iron(II)-alkyl species which undergo a controlled reduction to selectively form catalytically active styrene-stabilized iron(0)-alkyl complexes. While TMEDA is not bound to the catalytically active species, these active iron(0) complexes cannot be accessed in the absence of TMEDA. This mode of action, allowing for controlled reduction and access to iron(0) species, represents a new paradigm for the role of this important reaction additive in iron catalysis.Monosized beads of polar resins were synthesized for combinatorial chemistry and chemical biology by sustainable microchannel flow synthesis. Regular, biocompatible, and optically encoded beads could be efficiently prepared on large scale and in high yield. In a preparative flow polymerization instrument, taking advantage of a designed T-connector for droplet formation, quality beads were synthesized with accurate size control using a minimal amount of recirculating silicon oil as suspension medium. Bead-size was controlled through shear imposed by the silicon oil flow rate. This process provided 86% yield of &#;500 μm macrobeads beads within a 20 μm size range with no deformities or vacuoles, ideally suited for combinatorial chemistry and protein binding studies. The simple flow equipment consisted of a syringe pump for monomer and initiator delivery, a T-connector, a gear pump for oil recirculation, a long, heated coil of Teflon tubing and a collector syringe. The method was used for preparation of PEGAbeads, optically encoded with fluorescent microparticles. The microparticle matrix (MPM) encoded beads were tested in a MPM-decoder showing excellent recognition in bead decoding.A one-step synthesis of 1,1'- and 2,2'-methylene-bridged N-heterobiaryls directly from the corresponding N-heterocycles in a reaction with methylmagnesium chloride in the presence of catalytic amounts of N,N,N',N'-tetramethylethylenediamine under thermal and microwave conditions is reported. The split-and-merge methylenation of 2,2'-N-heterobiaryls and the direct ortho-alkylation of quinoline and isoquinoline with Grignard reagents have also been developed. Mechanistic studies identified several intermediates and provided insight into the formation and roles of magnesium hydride species in the process.Expansion microscopy is a recently introduced imaging technique that achieves super-resolution through physically expanding the specimen by ~4×, after embedding into a swellable gel. The resolution attained is, correspondingly, approximately fourfold better than the diffraction limit, or ~70 nm. This is a major improvement over conventional microscopy, but still lags behind modern STED or STORM setups, whose resolution can reach 20-30 nm. We addressed this issue here by introducing an improved gel recipe that enables an expansion factor of ~10× in each dimension, which corresponds to an expansion of the sample volume by more than 1,000-fold. Our protocol, which we termed X10 microscopy, achieves a resolution of 25-30 nm on conventional epifluorescence microscopes. X10 provides multi-color images similar or even superior to those produced with more challenging methods, such as STED, STORM, and iterative expansion microscopy (iExM). X10 is therefore the cheapest and easiest option for high-quality super-resolution imaging currently available. X10 should be usable in any laboratory, irrespective of the machinery owned or of the technical knowledge.Polyacrylamide gel electrophoresis (PAGE) coupled with mass spectrometry has been well established for separating, identifying and quantifying protein mixtures from cell lines, tissues or other biological samples. The copolymerization process of acrylamide and bis-acrylamide is the key to mastering this powerful technique. In general, this is a vinyl addition reaction initiated by free radical-generating reagents such as ammonium persulfate (APS) and tetramethylethylenediamine (TEMED) under basic pH and degassing experimental condition. We report herein a photocatalytic polymerization approach that is based on photo-generated hydroxyl radicals with nanoparticles of titanium dioxide. It was shown that the polymerization process is greatly accelerated in acidic condition when ultraviolet light shots on the gel solution containing TiO2 nanoparticles without degassing. This feature makes it very useful in preparing Triton X-100 acid urea (TAU) gel that has been developed for separating basic proteins such as histones and variants in acidic experimental condition. Additionally, the presence of titanium dioxide in the gel not only improves mechanistic property of gels but also changes the migration pattern of different proteins that have different affinities to titanium dioxide.

Yufeng contains other products and information you need, so please check it out.

N,N,N',N'-Tetramethylethylenediamine (TEMED), PlusOne

We found alternative products that can save you up to  per item-unit.  To compare product details, select up to 3 alternatives below and click Compare Selected. To add items to your cart, enter a quantity and click Add to Cart.

How is savings calculated?
We multiply the savings per unit (in parenthesis) times the total units of the original product.

For more -39-4information, please contact us. We will provide professional answers.

Original Product:

Description Catalog Number Availability Unit Your Price Price Per Qty